home *** CD-ROM | disk | FTP | other *** search
- Path: toad.stack.urc.tue.nl!not-for-mail
- From: jaco@stack.urc.tue.nl (Jaco Schoonen)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: CV64 Interlaced Problems
- Date: 21 Feb 1996 01:57:57 +0200
- Organization: MCGV Stack, Eindhoven University of Technology, the Netherlands.
- Message-ID: <4gdn65$d3r@toad.stack.urc.tue.nl>
- References: <4eu8r0$oag@newsstand.cit.cornell.edu> <1044.6622T208T1811@dalnet.se> <849.6623T1299T2435@telepost.no>
- NNTP-Posting-Host: toad.stack.urc.tue.nl
- X-Newsreader: TIN [version 1.2 PL2]
-
- J°rn Ove Nilsen (jornilse@telepost.no) wrote:
- : In article <4g8knu$n5v@toad.stack.urc.tue.nl>, at 19-Feb-96 03:45:34
- : Jaco Schoonen <jaco@stack.urc.tue.nl> wrote:
-
- : >: I can only report that I got this problem to. Looks like the 1942 needs to
- : >: be replaced by a 17" or 20"... =)
-
- : >Only the 16 bit modes have trouble with interlace. I think it's a software
- : >problem, but then again I wonder why it still isn't fixed...
-
- : >24bit interlace works fine here. Just be sure that you don't set the
- : >pixelclock >50Mhz.
- : >I've got 24bit interlace at 113 Hz, works fine...
- : >I even got 1104*800 24 bit interlace at 100Hz. About the amimum you can get
- : >out of the CyberVision...
-
- : With a C=1942 monitor?? impressive, could you please uuencode your setting to
- : me in a email please?? Or am I forced to fool around myself here?? =)
-
- Of course not on a 1942 :-)
- Sorry that I didn't mention it, but I've got an Idek MF8617...
- I was just talking about the 16bit interlace problem in general not
- specificly on the 1942.
-
- --
- Jaco Schoonen
- (jaco@stack.urc.tue.nl)
-